Hey everyone,
Weird problem: I was importing the same Rhino file in FluidRay for the past few days, updating it a little bit every time but at some point FluidRay started crashing when re-importing my file.
No major change, still the same Rhino file, and a weird mac error message when this happens (see the condensed version below).
Any went through the same thing?
Message generated in Mac Os:
Process: FluidRay [4611]
Path: /Applications/FluidRay.app/Contents/MacOS/FluidRay
Identifier: fluidinteractive.fluidray.pro
Version: 2.3.2 (???)
Code Type: X86-64 (Native)
Parent Process: ??? [1]
Responsible: FluidRay [4611]
User ID: 501
Date/Time: 2020-11-18 21:31:32.111 +0100
OS Version: Mac OS X 10.15.7 (19H15)
Report Version: 12
Anonymous UUID: E8FBB06E-ACBF-9311-6A46-A9E1358B1164
Time Awake Since Boot: 9500 seconds
System Integrity Protection: enabled
Crashed Thread: 13
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000700005715ff8
Exception Note: EXC_CORPSE_NOTIFY
Termination Signal: Bus error: 10
Termination Reason: Namespace SIGNAL, Code 0xa
Terminating Process: exc handler [4611]
Model: MacBookPro12,1, BootROM 192.0.0.0.0, 2 processors, Dual-Core Intel Core i5, 2.7 GHz, 16 GB, SMC 2.28f7
Graphics: kHW_IntelIris6100Item, Intel Iris Graphics 6100, spdisplays_builtin
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1867 MHz, 0x80CE, 0x4B3445424533303445422D45474346202020
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1867 MHz, 0x80CE, 0x4B3445424533303445422D45474346202020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x133), Broadcom BCM43xx 1.0 (7.77.111.1 AirPortDriverBrcmNIC-1615.2)
Bluetooth: Version 7.0.6f7, 3 services, 27 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM0256G, 251 GB
USB Device: USB 3.0 Bus
USB Device: Bluetooth USB Host Controller
USB Device: USB Receiver
Thunderbolt Bus: MacBook Pro, Apple Inc., 27.1